Dell EqualLogic FS7610

Liên hệ

Chính sách bán hàng

Dịch vụ khác

Thông số kỹ thuật

Dell EqualLogic FS7610 with FluidFS v4
Storage arrays supported New or existing Dell Storage PS Series arrays with version 8.1 firmware or greater
Capacity and bandwidth expansion Up to 509TB usable file capacity in a single name space. One or two FS7610 appliances in a NAS cluster.
Two Intel 10GbE dual-port NICs per controller. 10GbE can be either SFP+ or Base-T standards, and accommodate both copper and optical connectivity.
Client connectivity over Ethernet, SAN connectivity over iSCSI Ethernet switch is required; direct connect to the SAN is not supported.
NAS appliance Each NAS appliance has a pair of controllers in an active-active configuration, using cache mirroring and an integrated backup power supply. Each controller contains 24GB auto-adaptive R/W RAM-based cache and two quad-core Intel processors.
Management PS Series Group Manager GUI or CLI
Data protection features Dual controller active-active NAS appliance, redirect-on-write, user recoverable snapshots, point-in-time replication, NAS container cloning, NDMP backup, antivirus, battery-based BPS, access-based enumeration
Memory size Each controller has 24GB of memory (48GB per appliance) and its own backup battery that provides power sufficient to destage cache contents to a non-volatile internal storage device in the event of a power failure
Protocol support Server Message Block (SMB) 3.0, Network Files System (NFS) v4.1, iSCSI, Network Data Management Protocol (NDMP) 4, Active Directory, Lightweight Directory Access Protocol (LDAP), NIS (Network Information Service (NIS), Network Time Protocol (NTP), Simple Network Time Protocol (SNTP), Simple Network Management Protocol (SNMP), Address Resolution Protocol (ARP), Link Aggregation (IEEE 802.3ad), Adaptive Load Balancing (ALB)
Multi-client subnet support Configure multiple client networks and VLANs to present NFS exports or CIFS shares
User authentication SMB clients: Kerberos v5 and NTLM v2 on Microsoft Active Directory Server
NFS v4 clients: Kerberos 5 on AD and SASL support for encryption, NFS v4 Access Control Lists
Certified backup software Dell NetVault Backup 8.6x and 9.0x, Symantec BackupExec 2010 R3 and 2012, Symantec NetBackup 7.0 or later, CommVault Simpana 9.0 or later, IBM Tivoli Storage Manager 6.3
Qualified antivirus software Symantec ScanEngine 5.2 , Symantec Protection Engine 7.0, McAfee Virus Scan Enterprise 8.8 and Enterprise for Storage 1.0.2; Sophos Endpoint Security and Control 10.0; TrendMicro InterScan Web Security Suite 3.1
Directory services Microsoft Active Directory Domain Services, LDAP and NIS
Windows features LDAP signing, SMB signing, roaming profiles, hidden shares, access-based share enumeration
Qualified SAN switches See Dell Storage PS Series Compatibility Matrix
Deduplication and compression Policy-driven variable-block deduplication and LZPS compression; deduped data can be rehydrated on read
Thin provisioning Space can be over-allocated based on customer needs for more efficient capacity planning
Client network connectivity 4 x 10Gb SFP+ or Base-T Ethernet
Storage area network connectivity 4 x 10Gb SFP+ or Base-T Ethernet
Direct connect to the SAN is not supported
Min NAS cluster size 512GB for a single appliance; 1024GB for a two appliance cluster
Max NAS cluster size 509TB
Min/max NAS container size 20MB/509TB
Max files in a cluster 64 billion per appliance
Max NAS containers 1024
Max file size 10TB
Max file name length 255 bytes
Max number of directories in a cluster 64 billion
Max directory depth 512
Max NFS mounts 1024 (one or two appliances)
Max CIFS shares 1024 (one or two appliances)
Max concurrent CIFS connections 10,000 per NAS appliance, 20,000 for a two appliance cluster
Max quota rules per NAS container (user quotas) 1000 per NAS container
Max quota rules per cluster (user quotas) 1000 per NAS cluster
Max local users in a NAS cluster 100
Max local groups in a NAS cluster 100
Snapshots Redirect-on-write snapshots
Max snapshots per NAS container/cluster 1024/10,000
Max containers enabled for replication in a NAS cluster 100
Max simultaneous replicated containers 10
Max schedules per NAS cluster 512
Backup Backups using NDMP v4
Antivirus Third-party antivirus applications supported through ICAP
Chassis (per dual controller appliance) Height: 2U/86.4 mm (3.4 in)
Width: 481.50 mm (18.96 in) with rack flange; 446.3 mm (17.6 in) without rack flange
Depth: 741.0 mm (29.2 in) without bezel and handle; 813.0 mm (32.0 in) with bezel and handle
Weight (maximum configuration): 30.5 kg (67 lb)
Rack support ReadyRails II static rails for tool-less mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded-hole racks
Power Wattage: 717W output per appliance
Voltage: 90 V AC to 264V AC, autoranging, 47 Hz/63 Hz. Note: This system is also designed to be connected to IT power systems with a phase to phase voltage not exceeding 230 V.
Heat dissipation: 2446 BTU/hr. Note: The heat dissipation is calculated using the power supply wattage rating. The heat dissipation values are for the entire system which includes (chassis and two controllers).
Maximum inrush current: Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55 A per power supply for 10 ms or less.
Environmental operating conditions
Temperature Operating: 5 °C to 40 °C (41 °F to 104 °F) with a maximum temperature gradation of 20 °C per hour
Storage: -40 °C to -60°C (–40 °F to 140 °F) with a maximum temperature gradation of 20 °C per hour
Relative humidity Operating: 20% to 80% (non-condensing) with maximum humidity gradation of 10% per hour at maximum wet bulb temperature of 29 °C (89 °F)
Non-operating: 5% to 95% with a maximum humidity gradation of 10% per hour at a maximum wet bulb temperature of 38 °C (100 °F)
Maximum vibration Operating: 0.26 Grms (5 Hz – 350 Hz @ 0.0002G2/Hz) in operational orientation for 5 minutes (maximum)
Non-operating: 1.88 Grms with the following PSD profile (all 6 sides tested for 15 minutes each side)
Frequency (Hz) G2/Hz 10 0.13, 20 0.13, 70 0.004, 130 0.004, 165 0.0018, 500 0.0018
Maximum shock Operating: 31G half-sine shock +/-5% with pulse duration of 2.6ms +/- 10% in the operational orientation (maximum)
Non-operating: Square wave shock of 27 G, at 235 inches/second (596.90 cm/second) velocity change (all six sides tested)
Operating altitude -16 to 3048 m (-50 to 10,000 feet)
For altitudes above 2950 feet, the maximum operating temperature is derated 1° F/550 feet.A197
Non-operating –15.2 m to 10,668 m (–50 ft to 35,000 ft)
Airborne contaminant level class G1 as defined by ISA-S71.04-1985

Đánh giá (0)

Đánh giá Dell EqualLogic FS7610

5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá Dell EqualLogic FS7610
Gửi ảnh chụp thực tế
0 ký tự (tối thiểu 10)
    +

    Chưa có đánh giá nào.

    Chưa có bình luận nào